FAIL (the browser should render some flash content, not this).

Laser beam shaping has never been so easy!

FAIL (the browser should render some flash content, not this).
Laser beam shaping has never been so easy!
 

Laser beam shaping has never been so easy!

 
Laser beam shaping has never been so easy!
Laser beam shaping has never been so easy! Laser beam shaping has never been so easy! Laser beam shaping has never been so easy!
 

Dr. Alexander Laskin provides an overview of AdlOptica at exhibition Munich 2013

Dr. Alexander Laskin provides an overview of AdlOptica and discusses the company's beam shaping optics products.

Focal-piShaper in Photovoltaics


Finalist of 2010 Prism Awards for Photonics Innovation

Table of Contents

Mount

Laser beam shaping has never been so easy!
4-Axis πShaper Mount

 

The principle of intensity re-distribution requires the πShaper to be properly aligned using 4-axis mounts. Typical tolerances are 0.1 mm lateral shift and 10 arcmin tilt, - these conditions can be easily fulfilled by widely used optical Mounts.

πShaper Mount:
  - 4-axis Mount alignment
  - Alignment screws with knobs, convenient for manual alignment
  - 2 mounting faces for optimum orientation

 

4-Axis piShaper Mount - Laser beam shaping has never been so easy!

Technical Specifications:
Tilt/tip range ±2°
Sensitivity 3 arcsec
XY translation range ±2 mm
Sensitivity for XY translation 1 µm
πShaper Mounting

Inner Thread M 27x1

Overall dimensions 77 x 77 x 65 mm
Mounting Thread M6,  2 positions
Weight 200 g

Drawing:

4-Axis piShaper Mount - Laser beam shaping has never been so easy!

To increase a picture



Laser beam shaping has never been so easy! Laser beam shaping has never been so easy! Laser beam shaping has never been so easy!

Mount_ind

Laser beam shaping has never been so easy!
4-Axis πShaper Mount industrial

 

The principle of intensity re-distribution requires the
πShaper to be properly aligned using 4-axis mounts. Typical tolerances are 0.1 mm lateral shift and 10 arcmin tilt, - these conditions can be easily fulfilled by widely used optical Mounts.

πShaper Mount for industrial applications:
  - 4-axis Mount alignment
  - HEX alignment screws
  - locking alignment screws after finishing the alignment
  - 5 mounting faces for optimum orientation

 

4-Axis piShaper Mount - Laser beam shaping has never been so easy!

Technical Specifications:
Tilt/tip range ±4°
Sensitivity 3 arcsec
XY translation range ±2 mm
Sensitivity for XY translation 1 µm
Locking of alignment screws Yes
πShaper Mounting

Inner Thread M 27x1

Overall dimensions 79 x 79 x 34 mm
Mounting Thread M6,   5 positions
Weight 200 g

Drawing:

4-Axis piShaper Mount - Laser beam shaping has never been so easy!

To increase a picture



Laser beam shaping has never been so easy! Laser beam shaping has never been so easy! Laser beam shaping has never been so easy!
   

       Copyright © 2004 - 2017

 

Home | News | Publications | Products | Inquiry | Download | Impressum

Laser beam shaping has never been so easy!